Tubes: All Sizes/Types

This is Surly’s 29 x 3-inch Presta valve tube. It fits their Knard tires and is made of butyl rubber.

- Butyl rubber - 29 x 2.1 (700 x 50-52)

Our Standard Schrader Valve Tubes feature a molded method of construction that ensures a consistent thickness of butyl rubber. This means that they don't have any unnecessary weight and will roll smooth, ride after ride. - Individually cured for consistent tube thickness = the utmost in quality.

The least expensive way to ditch 40+ grams of rotating weight is with our Turbo Talc Tubes. A patented, oversized 4.8cm valve base prevents tearing, while a partially threaded valve stem provides a clean interface with pumps. Our lightest and most supple tube offering, it's also been proven in rolling-resistance testing to reduce drag by as much as 13% per wheel. - Packed in talc for easier installation. - 4.8cm valve base prevents issues of valves tearing off. - Smooth at the top for easier pump head insertion and reduced wear on pump internals. - Thinner tube design saves approximately 40 grams of rotating weight. - Thickness: 0.6mm

Because it's hard to know when you're going to get a flat, it's always good to have extra tubes on hand. Specialized's Turbo Ultralight MTB Tube w/Talc is lightweight to save rotational weight. The Talc lets the tube move easier inside the tire for a better ride with fewer flats.

- Can be used with fat bike tires 4.0" and under - ISO Diameter: 559 / 26" mtn - ISO Width (mm): 60 mm , 61 mm , 62 mm , 63 mm , 64 mm , 65 mm , 66 mm , 67 mm , 68 mm - Labeled Size: 26 x 2.4-2.7 - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Length: Short 32-40mm - Valve Shaft: Threaded - Weight: 256g

- ISO Diameter: 305 / 16" BMX - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Length: Short 32-40mm - Valve Shaft: Threaded - Weight: 76g (1.25-1.5), 88g (1.5-1.75)

- ISO Diameter: 406 / 20" BMX - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Length: Short 32-40mm - Valve Shaft: Threaded - Weight: 92g (1.25-1.5), 118g (1.5-1.75), 132g (1.75-2.125)

- ISO Diameter: 584 / 650b / 27.5" , 590 / 26 x 1 3/8" - ISO Width (mm): 37 mm - Labeled Size: 26 x 1-3/8 - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 136g

An inner tube for fat bikes, built with the Hodag and Jackalope in mind. Fat tires need fat tubes. The Fat Bike Tube is just that, a tube built specifically for fat bikes. Tailored sizes perfectly suit the line of Bontrager fat tire models. Product details - 0.9mm wall thickness - Equipped with removable valve cores - 100% inspected for guaranteed quality

The industry standard comes in all sizes. Premium-quality Bontrager Standard butyl rubber tubes feature a 0.9mm wall thickness for the perfect balance of weight savings and durability. Product details - 0.9mm wall thickness - Equipped with removable valve cores - 100% inspected for guaranteed quality - Best value

The industry standard comes in all sizes. Premium-quality Bontrager Standard butyl rubber tubes feature a 0.9mm wall thickness for the perfect balance of weight savings and durability. - 0.9mm wall thickness - Equipped with removable valve cores - 100% inspected for guaranteed quality - Best value 27-inch tire size equivalents - 700cx 23 – 25 also fits 27 x 7/8 – 1 - 700c x 28 – 32 also fits 27 x 1-1/8 – 1-1/4 - 700c x 35 – 44 also fits 27 x 1-3/8 – 1-3/4

The industry standard comes in all sizes Premium-quality Bontrager Standard butyl rubber tubes feature a 0.9mm wall thickness for the perfect balance of weight savings and durability. - 0.9mm wall thickness - Equipped with removable valve cores - 100% inspected for guaranteed quality - Best value 27-inch tire size equivalents - 700c x 28 – 32 also fits 27 x 1-1/8 – 1-1/4 - 700c x 35 – 44 also fits 27 x 1-3/8 – 1-3/4

Protect yourself from flats with Bontrager Thorn-Resistant tubes. Asymmetric design uses thicker rubber on the tread side and thinner rubber elsewhere, which saves weight while maximizing puncture protection. Product details - 4.1mm thickness (tread side) - Asymmetric extrusion puts extra rubber along tire sidewall and tread zones - 100% inspected for guaranteed quality 27-inch tire size equivalents - 700c x 28 – 32 also fits 27 x 1-1/8 – 1-1/4 - 700c x 35 – 44 also fits 27 x 1-3/8 – 1-3/4

Thanks to the lightweight aluminum valve and butyl rubber construction, Zipp's Tangente Butyl Tube weighs only 89 grams. So it reduces that ever-critical rotational mass making your wheels lighter and your bicycle easier to pedal too. This fine tube is also made of .85mm-thick rubber for excellent reliability. The valve is 37mm long and features a removable core. - Weight: 89 grams - Valve length: 37mm

The Zipp Tangente butyl tubes are designed to meet the needs of a new era of road riding that includes adventures aboard wider tires. The tube’s 0.60mm thickness is optimized for durability. - 37mm valve stem length - Lightweight aluminum valve body with removable Presta valve core - For use with Zipp Tangente Aluminum Knurled Valve Extender - 0.60mm thick to optimize durability - Weight: 72 grams in 700x20-28 and 96 grams in 700x28-32

Durable enough to keep you rolling, yet light enough to not feel overly cumbersome in your jersey pocket. - Presta valve

Surly Inner Tube to fit a wide range of plus-size and fat bike tires. - Labeled Size: 26 x 3.0 - 4.8 - Weight: 310 g - Valve Core: Removable - Shaft Type: Threaded - ISO Width (mm): 76mm–100mm - Tube Compound: Butyl - ISO Diameter: 559 / 26-inch MTN - Valve: Presta Short 32-40mm

Nothing in the cycling world is more infuriating than flat tires. We get it, because we get them just like you. But with our Desert Protection Presta Valve Tubes, you can minimize, if not eliminate, flats at the terrible hands of debris, thorns, or whatever else is halting your rides. Starting at the basis of the construction, we designed the tube to be thicker at the outer side, the part against the tire, in order to stop pesky bits from puncturing all the way through the tube. We then make the inner side, the part against the rim, thinner in order to reduce weight. This way, you don't have to sacrifice performance in the name of protection. We didn't stop there, however, as these tubes also feature our Airlock sealant that coats the tube for permanent protection against punctures. Not only this, but the sealant is designed to work continuously in order to prevent slow leaks from occurring, so erring complete catastrophe, you won't have to worry about flatting when you're riding over debris. We even addressed the common issue of sealant pooling with a completely homogenous design, so the tire/tube combo will always roll smooth and even. - Thicker construction on the outer side (against the tire) enhances puncture protection. - Thinner construction on the inner side (against the rim) maximizes weight savings. - Sealant coats the tube for permanent protection against punctures. - Non-toxic, non-separating formula will last the life of your tube. - Designed to work continuously in order to prevent slow leaks. - Homogenous design prevents puddles with no need to shake. - Will not dry out like the many other sealants.

- 2.25mm wall thickness - ISO Diameter: 507 / 24" BMX - ISO Width (mm): 60 mm , 61 mm , 62 mm , 63 mm , 64 mm , 65 mm , 66 mm , 67 mm , 68 mm , 69 mm - Labeled Size: 24 x 2.4-2.75 - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Length: Short 32-40mm - Valve Shaft: Threaded - Weight: 576g

- 2.25mm wall thickness - ISO Diameter: 507 / 24" BMX - ISO Width (mm): 60 mm , 61 mm , 62 mm , 63 mm , 64 mm , 65 mm , 66 mm , 67 mm , 68 mm , 69 mm - Labeled Size: 24 x 2.4-2.75 - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 581g

- 2.25mm wall thickness - ISO Diameter: 559 / 26" mtn - ISO Width (mm): 60 mm , 61 mm , 62 mm , 63 mm , 64 mm , 65 mm , 66 mm , 67 mm , 68 mm , 69 mm - Labeled Size: 26 x 2.4-2.75 - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Length: Short 32-40mm - Valve Shaft: Threaded - Weight: 690g

- 2.25mm wall thickness - ISO Diameter: 559 / 26" mtn - ISO Width (mm): 60 mm , 61 mm , 62 mm , 63 mm , 64 mm , 65 mm , 66 mm , 67 mm , 68 mm , 69 mm - Labeled Size: 26 x 2.4-2.75 - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 694g

- 1.2mm thick - ISO Diameter: 559 / 26" mtn - ISO Width (mm): 59 mm , 60 mm , 61 mm , 62 mm , 63 mm , 64 mm , 65 mm , 66 mm , 67 mm , 68 mm , 69 mm - Labeled Size: 26 x 2.36-2.75 - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Length: Schrader - Valve Shaft: Smooth - Weight: 388g

Q-Tubes Fat Tubes have what you need for big tires. - Q-Tubes Fat Bike tubes feature environmentally friendly soy ink printing on recycled cardboard - Labeled Size: 26 x 3.5-4 - Weight: 500 g - Valve Core: Removable - ISO Width (mm): 88 mm , 89 mm , 90 mm , 91 mm , 92 mm , 93 mm , 94 mm , 95 mm , 96 mm , 97 mm , 98 mm , 99 mm , 100 mm - ISO Diameter: 559 / 26" MTN - Valve: Presta Short 32-40mm - Wall Thickness: 1 mm

Q-Tubes Fat Tubes have what you need for big tires. - Q-Tubes Fat Bike tubes feature environmentally friendly soy ink printing on recycled cardboard - Labeled Size: 26 x 3.5-4 - Weight: 500 g - ISO Width (mm): 88 mm , 89 mm , 90 mm , 91 mm , 92 mm , 93 mm , 94 mm , 95 mm , 96 mm , 97 mm , 98 mm , 99 mm , 100 mm - ISO Diameter: 559 / 26" MTN - Wall Thickness: 1 mm

Q-Tubes Fat Tubes have what you need for big tires. - Q-Tubes Fat Bike tubes feature environmentally friendly soy ink printing on recycled cardboard - Labeled Size: 26 x 4.0-4.8 - Weight: 580 g - ISO Width (mm): 100 mm , 101 mm , 102 mm , 103 mm , 104 mm , 105 mm , 106 mm , 107 mm , 108 mm , 109 mm , 110 mm , 111 mm , 112 mm , 113 mm , 114 mm , 115 mm , 116 mm , 117 mm , 118 mm , 119 mm , 120 mm - ISO Diameter: 559 / 26" MTN - Wall Thickness: 1 mm - Valve length: 32mm

Q-Tubes Fat Tubes have what you need for big tires. - Q-Tubes Fat Bike tubes feature environmentally friendly soy ink printing on recycled cardboard - Labeled Size: 26 x 4.0-4.8 - Weight: 580 g - ISO Width (mm): 100 mm , 101 mm , 102 mm , 103 mm , 104 mm , 105 mm , 106 mm , 107 mm , 108 mm , 109 mm , 110 mm , 111 mm , 112 mm , 113 mm , 114 mm , 115 mm , 116 mm , 117 mm , 118 mm , 119 mm , 120 mm - ISO Diameter: 559 / 26" MTN - Valve: Standard Schrader - Wall Thickness: 1 mm - Valve length: 32mm

- ISO Diameter: 438 , 451/ 20 x 1-1/8", 20 x 1-1/8" - ISO Width (mm): 25 mm , 26 mm , 27 mm , 28 mm - Labeled Size: 20 x 1-1/8 - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 78g (32mm), 84g (60mm)

- ISO Diameter: 520 / 24" mini bmx - ISO Width (mm): 25 mm , 26 mm , 27 mm , 28 mm - Labeled Size: 24 x 1-1/8 - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 80g (32mm), 82g (60mm)