Car Racks

- Powdercoated steel body with 9mm skewer & hole in handle for padlock

- For carrying unique frames on hang-on type car racks - Quick release clamp adjusts to fit between stem and seatpost - Rubberized hooks protect bikes finish

- Versatile: Accommodates all 15mm & 12mm thru-axles. - Flexible: Adapter for most roof racks (Thule, Yakima, Kuat) - Quick Assembly: Easy mount on any flat surface - Fully Adjustable: Thumb screw inserts allow for instant adjustments - Construction: Lightweight aluminum and steel

Our most adjustable and advanced tailgate pad, the Mission allows your tonneau cover to fully close and lock. A two-panel, full coverage design can adjust for almost any height of tailgate and downtube attachment points are customizable for your fleet of bikes. Durable PVC tarpaulin on the outside and a micro-brushed inner lining to keep your tailgate scratch-free. Available in three sizes: - 2-Bike (up to 2 bikes) - partial tailgate coverage for most trucks - Mid-Size (up to 5 bikes) - for Small and Mid-Size Trucks (Tacoma, Ranger, Frontier etc.) - Full-Size (up to 6 bikes) - for Full Size Trucks (F-150 to F-350, 1500 - 3500 series, Tundra and Titan)

The Destination E for Electric Bikes is our new hitch bike rack designed specifically to carry electric bikes with any sized tire up to 4.5" wide. This new bike rack has a sleek and modern design and can carry up to two 70 lb. electric bikes or standard bikes. It includes an expandable, wide aluminum ramp so you can load and unload your bikes easily. The Destination E hitch-mounted bike rack can fold flat against the car when not in use and features "balanced tilting" where the pivot point is between the bikes for easy trunk access when the bikes are loaded. Other features include adjustable, keyed-alike locking frame and seat post clamps, ideal for unusual bike geometries as well as our No Wobble-No Tools Hitch Tightening System. - Capacity: Two Bikes (Max. 70 lbs. per bike) - Hitch Size: 2" only (Do not use a 1 1/4" - 2" hitch adapter) - Includes a 46" long ramp - Maximum bike wheelbase: 50” - Maximum tire width: 4.5” - Includes keyed-alike locking hitch pin and locking frame clamps - "No-Wobble Hitch System" eliminates slack between the receiver and the rack without the use of tools - Folds flat against car when not in use - Feature's "Balanced Tilting" with the pivot point between the 2 bikes, making tilting down for cargo door access as easy as it gets - The frame grabbers on this rack can hold step-through bikes by the seatpost, therefore Bike Adapters are not needed and should not be used - Includes optional fixed Frame Grabber to use in place of quick release option - Space between bikes: 11" - Rack Weight: 46 lbs. - Limited Lifetime Warranty - Fits round or oval tubing or seat posts between 1" and 2" in diameter - For step through bikes: Secure the bicycle by using the racks Frame Grabber around the bikes seat post - 4" Strap Extension Kits sold separately: STPEXT - Not to be used on front hitches - Not to be used with a bike cover - Not to be used with any 1-1/4" - 2" Adapter - Not to be used with any Hitch Extension longer than 8" - Not to be used on any trailer, fifth wheel or towed vehicle - CLASS B RV APPROVED ONLY (NOT APPROVED FOR CLASS A OR CLASS C RV'S)

RackDock from Kuat. A sophisticated solution for storing your hitch rack. Easy wall installation and the ability to hold up to 100lbs keeps your hitch rack secure and out of the way in the garage, preventing damage to the rack, cars, and of course—bikes. - Supports up to a 4-bike rack (100 lb max) - All hardware included - 2" hitch and 1.25" hitch adaptor included - Magnetic faceplate

For those cases where fitment just isn't right. The Hi-Lo is a 2" hitch Extension & Rise/Drop built with Kuat style. It provides 7" or 10" of extension and 2.125" of rise/drop. The Hi-Lo comes with a threaded hitch pin to ensure a tight fit in your receiver. Approved for use with the Kuat NV 2.0, Base 2.0, Sherpa 2.0 and Transfer family.

Like the first version, the Pivot v2 will make sure your rack never gets in the way. Smoothly swing up to a 4-bike rack to the side for clear access to tailgates, rear doors, and hatchbacks. And when it’s time to load up, the locking mechanism makes sure your rack only moves when you want it to. - Clearance for tailgates or rear doors - Proprietary FLATLOCK cam system - Locking hitch pin - Lifetime Warranty - 2” Hitch Only - Quick-release 90 or 120 degree swing away - Driver-Side or Passenger-Side Swing Options - Compatible with fully loaded 4-bike NV 2.0 - Load up to a maximum of 250lbs

The Transfer v2 is more solid than ever. From the steel construction of the original to a new Flatlock hitch cam for enhanced stability in tow. Plus, a semi-integrated cable lock for an upgrade in security. The best part? The new Transfer v2 has the modular configurations available so you get a multi-rider rack at an everyone-friendly price. - Flatlock cam for 2", ball cam for 1.25" - Includes semi-integrated bicycle cable lock - Tamper-resistant hitch security - More robust hitch design for enhanced stability in tow - Holds up to a 50" wheelbase bike (previously 47") - Holds wheels 18"-29" (previously 20"-29") - Holds tires up to 5" with accessory strap (previously 4.5") + better hook clearance for loading fat bikes - Automotive-grade 750 hour salt spray hardware - Dedicated 2" hitch version in the 2 bike configuration can be directly mounted on campers, recreational vehicles, or trailers with CHASSIS MOUNTED RECEIVERS ONLY.

Thru axle adaptor sleeve for StreetRod, HotRod & SwitchHitter. Simply loosen the screws, remove your existing axle and slide this in.

The RockyMounts HotRod is a do-it-all truck mount for bikes with 12x100, 15x100, and "Boost" 15x110 thru-axles.

For 2" hitches, this extension gives you more clearance for your bike rack or trailer away from the vehicle. The insert tube is threaded, by bolting in the extension, you get rid of 80% of the play and rattle vs extensions that use a pin. Included is the 8" extension, hitch bolt, and lock pod. Allows BackStage, MonoRail & SplitRail racks to fold flat on Wrangler and other cars with spare tires. Works well with all bike racks including Thule, Yakima, and Kuat. As with all hitch extensions, they lower weight ratings by 50%, confirm you are within specifications before use. - Electroplated plus powdercoat for best rust resistance - Welded steel construction - Includes lock, two keys & wrench for installation - Fits 2" Hitches only - Maximum Trailer Weight- Lower amount of 3500 lbs OR 50% maximum listed on your trailer hitch - Maximum Tongue Weight- Lower amount of 350 lbs or 50% of maximum listed on your hitch. (For use with bicycles, Tongue Weight is your guide, not Trailer Weight)

RockyMounts StreetRod is a thru-axle adapter that works with fork-mounted bike racks from any manufacturer. It includes axles to accommodate bikes with 12x100, 15x100, and "Boost" 15x110 thru-axles.

Introducing the DropTop; our next locking bike fork mount that grows upon years of feedback and use. The DropTop utilizes a TPU overmolded shim to allow for both 12mm and 15mm axles to fit without the need for switching shims out. It is based upon the same clamshell design as the DriveShaft series, which allows for easy loading and adapts to minor differences in axle diameter or contouring. The DropTop also includes mounting holes for both horizontal and vertical mounting orientations, it replaces both the DriveShaft HM and DriveShaft Track Mounts. - The only locking thru-axle track mount for truck and van tracks - Compatible with 12mm, 15mm, & 20mm thru axles up to 110mm wide (for 20mm, shims must be removed) - Vertical and horizontal mounting positions - TPU overmolded shim eliminates the need to switch out shims for 12mm or 15mm axles - Anti-Theft: TPU surface provides sufficient friction to stop the axle from being removed when DropTop is firmly clamped and locked - Can fit QR bikes with our 9mm QR with Dummy Axle - sold separately - Wide mouth opening to easily load your bike and a locking T-Bolt that adjusts for a tighter hold so the thru-axle cannot be removed when locked - Carries 1 bike, up to 45 lbs - Lock core, keys, and Track Hardware Included - For 9x100mm quick release or bolt on axles only, you can use the Dummy Axle with your DropTop. Fitment Note: Due to the nature of the DropTop clamp not bracing the fork legs outward, there will be play when used with Mavic Speed Release and Specialized 12mm forks with an oversized non threaded fork leg. For those instances, please use a HotRod instead Fitment Note: DropTop is NOT compatiblle with Lefty fork mount from Cannondale. RockyMounts does not have a compatible mount for Lefty at this time.

The RockyMounts TomaHawk low-profile upright mount that's easy to use and even easier on your wallet. Fat-bike ready out of the box (up to 5" tires), and will hold all styles of bikes, road, mountain, cruiser, and childrens (20 - 29" wheels). Features: - No bike frame contact - simply ratchet the hook over the front wheel and secure the front/rear wheelstraps - Fat bike ready (up to 5" tires) out of the box. Includes two wheel strap extensions - Swingarm easily adjusts for driver side and passenger side installation - Mounts to all styles of crossbars - round, square, factory, aero - Holds all styles of bikes, 20 - 29" wheels (except those with front fenders) - New Easy-Load wheel straps make loading bikes easier than ever - Optional 2-pack locks (sold separately) lock rack to car and bike to rack

Expand the capacity of your HighNoon FC or HighNoon FC Solo with this Add-On. - Compatible with 2" HighNoon FC to expand carrying capacity to 3 bikes, or HighNoon FC Solo to expand capacity to 2 bikes. - Lowers max weight capacity from 60 lbs per bike to 45 lbs per tray - No contact with frame, secures bicycle by front wheel - Carries road tires up to 5.0" fat bike tires, and diameters from 20" to 29" - Compatible with bicycle wheelbases from 34" to 52" - Rack weight 14lbs (shipping weight 20lbs) - NOT COMPATIBLE with BackStage, MonoRail, SplitRail, GuideRail (Only fits HighNoon FC 2" or Solo)

This is a one bike add-on to turn your MonoRail 2-inch (sold separately) into a three bike carrier. Simply remove the end cap from the MonoRail, slide the attachment in and it quickly secures with two bolts. The cable lock included with the MonoRail is long enough to secure all three bikes. Simply and easy. Not compatible with 1.25-inch MonoRail.

The little brother of the MonoRail, the MonoRail Solo is perfect for those who do not need all of the capacity but still want the versatility of it’s larger brother. Superlight with a 25 lbs rack weight, the solo is our easiest rack to take on and off a vehicle. Out of the box the MonoRail family has the widest carrying capacity of our line up, due to their ability to fit up to a 5” fat bike tire. The solo also has the added versatility of allowing for both 1.25” and 2” hitches out of the box. - Carries 1 bike, up to 60 lbs. Expandable to 2 bikes up to 45 lbs per tray, with Add-On - No contact with frame, secures bicycle by front wheel - Carries road tires up to 5.0” fat bike tires, and diameters from 20” to 29” - Compatible with bicycle wheelbases from 36” to 50” - Folds flat against the vehicle and tilts down 30 degrees to allow for hatch access - Fits both 1.25” and 2” hitches with adapter sleeve (included) & anti-wobble bolt - Includes locking hitch bolt, cable lock, and standard lock pods, keyed alike - Note: Cable lock is not intended to be used while driving. Road vibrations can cause unintended wear on frames, rims, and the rack itself. Please remove cable lock when vehicle is in motion - Not for use with fender equipped bicycles, or on Class I hitch receivers - Rack weight 25 lbs (shipping weight 35 lbs) - Fit Memo- For cargo vans a fit check is required. Depending on hitch manufacturer, handlebar width, vehicle wheelbase, and accessories an 8" Hitch Extension may be required for handlebars to clear the door.

The HighNoon FC Solo is the first and only rack in the RockyMounts' family that supports use of bikes with fenders. The rack includes an upswept base allowing for better departure angle, as well as a tiered platform for handlebar clearance. The dual strap system allows for secure transport for bikes with and without fenders. - Compatible with bikes with fenders - Compatible with bikes without fenders - Carries 1 bike, up to 60 lbs. Expandable to 2 bikes, up to 60 lbs per tray, with Add-On - No contact with frame, secures bicycle by front wheel - Carries road tires up to 5.0" fat bike tires, and diameters from 20" to 29" - Compatible with bicycle wheelbases from 36" to 50" - Folds flat against the vehicle and tilts down 30 degrees to allow for hatch access - Includes anti-wobble hitch pin - Includes locking hitch bolt, cable lock, and standard lock pods, keyed alike - Rack weight 29 lbs (shipping weight 35 lbs) - Fit Memo- For cargo vans a fit check is required. Depending on hitch manufacturer, handlebar width, vehicle wheelbase, and accessories an 8" Hitch Extension may be required for handlebars to clear the doors

The MonoRail is the most versatile rack in the RockyMounts line up. It has the capacity for all styles of bikes; from skinny tire road machines, up to heavy fat tire E-bikes, this rack has you covered. - Carries 2 bikes ONLY, up to 60 lbs per tray (120 lbs total). 1.25" variant is NOT compatible with Add-On - No contact with frame, secures bicycle by front wheel - Carries road tires up to 5.0” fat bike tires, and diameters from 20” to 29” - Compatible with bicycle wheelbases from 36” to 50” - Folds flat against the vehicle and tilts down 30 degrees to allow for hatch access - Includes anti-wobble hitch pin - If you want to fit both 1.25" and 2" size hitches, get the 1.25" and our adaptor sleeve. This configuration does not allow for the use of an Add-On - Includes locking hitch bolt, cable lock, and standard lock pods, keyed alike - Note: Cable lock is not intended to be used while driving. Road vibrations can cause unintended wear on frames, rims, and the rack itself. Please remove cable lock when vehicle is in motion - Not for use with fender equipped bicycles, or on Class I hitch receivers - Rack weight 39 lbs (shipping weight 51 lbs) - Fit Memo- For cargo vans a fit check is required. Depending on hitch manufacturer, handlebar width, vehicle wheelbase, and accessories an 8" Hitch Extension may be required for handlebars to clear the door

The MonoRail is the most versatile rack in the RockyMounts line up. It has the capacity for all styles of bikes; from skinny tire road machines, up to heavy fat tire E-bikes, this rack has you covered. - Carries 2 bikes, up to 60 lbs per tray (120 lbs total). 2” variant is expandable to 3 bikes up to 45 lbs per tray, with Add-On - No contact with frame, secures bicycle by front wheel - Carries road tires up to 5.0” fat bike tires, and diameters from 20” to 29” - Compatible with bicycle wheelbases from 36” to 50” - Folds flat against the vehicle and tilts down 30 degrees to allow for hatch access - Includes anti-wobble hitch pin - If you want to fit both 1.25" and 2" size hitches, get the 1.25" and our adaptor sleeve. This configuration does not allow for the use of an Add-On - Includes locking hitch bolt, cable lock, and standard lock pods, keyed alike - Note: Cable lock is not intended to be used while driving. Road vibrations can cause unintended wear on frames, rims, and the rack itself. Please remove cable lock when vehicle is in motion - Not for use with fender equipped bicycles - Rack weight 39 lbs (shipping weight 51 lbs) - Fit Memo- For cargo vans a fit check is required. Depending on hitch manufacturer, handlebar width, vehicle wheelbase, and accessories an 8" Hitch Extension may be required for handlebars to clear the door

The HighNoon FC is the first and only rack in the RockyMounts' family that supports use of bikes with fenders. The rack includes an upswept base allowing for better departure angle, as well as a tiered platform for handlebar clearance. The dual strap system allows for secure transport for bikes with and without fenders. - Compatible with bikes with fenders - Compatible with bikes without fenders - Carries 2 bikes, up to 60 lbs per tray (120 lbs total). 2" variant is expandable to 3 bikes up to 45 lbs per tray, with Add-On - No contact with frame, secures bicycle by front wheel - Carries road tires up to 5.0" fat bike tires, and diameters from 20" to 29" - Compatible with bicycle wheelbases from 36" to 50" - Folds flat against the vehicle and tilts down 30 degrees to allow for hatch access - Includes anti-wobble hitch pin - If you want to fit both 1.25" and 2" size hitches, get the 1.25" and the adaptor sleeve. This configuration does not allow for the use of an Add-On - Includes locking hitch bolt, cable lock, and standard lock pods, keyed alike - Rack weight 39 lbs (shipping weight 49 lbs) - Fit Memo- For cargo vans (vehicles with flat backs), Depending on hitch placement, handlebar width, an 8" Hitch Extension may be required for wide mountain bike handlebars to clear the doors.

The BackStage is the only swing away platform hitch rack on the market that swings out 180 degrees. No matter if you have a truck, SUV or camper van, this rack is perfect for those who need open access to the back end of their vehicle. Based around the MonoRail platform, the BackStage provides full access to the back of the vehicle, even with bikes loaded. - The industry’s first 180 degree swing away platform hitch rack - Carries 2 bikes, up to 60 lbs per tray (120 lbs total). Not compatible with Add-On - No contact with frame, secures bicycle by front wheel - Carries road tires up to 5.0” fat bike tires, and diameters from 20” to 29” - Compatible with bicycle wheelbases from 36” to 50” - Folds flat against the vehicle and tilts down 30 degrees to allow for hatch access - Only available for 2" hitches. Utilizes RockyMounts premium 3-axis anti wobble system - Includes locking hitch bolt and cable lock, keyed alike - Not for use with fender equipped bicycles - Rack weight 59 lbs (shipping weight 75 lbs) - For cargo vans like Sprinter, Transit and ProMaster, an 8" Hitch Extension is usually required for handlebars to clear the door. Road/Gravel is usually OK, modern mountain bike bars are too wide and can contact the rear door and the hitch extension is required.

Introducing the GigaWatt, our advanced two-bike hitch rack designed for electric bicycles weighing up to 80 pounds each (RV and 5th Wheel limitations, see below). Unlike other ebike racks, the GigaWatt addresses common issues, offering frame protection, fender compatibility, robust locking, and a generous bike spacing. Enjoy effortless bike loading and peace of mind on the road with the GigaWatt. - Developed for electric bikes, works for standard bikes as well - 2 Bike Hitch Rack for 2" Hitches - Aluminum ramp included for effortless loading - Fender Compatible - Contacts the front tire only, no frame contact - Aluminum wheel trays accommodate wheelbases from 34" to 55" - Wheel sizes 20" to 29" and up to 4.5" wide - 3 axis anti-wobble hitch bolt is rock solid in the hitch - 8mm square link security chain included provides better security than cables - Same key locks bikes to rack, rack to car - Fold flat against the car and down 30 degrees for hatch access - Locks included, keyed alike, locks rack to car and bikes to rack - 15" spacing between bikes allows plenty of clearance and no interference when using a ramp - Pull handle for folding is easily accessible to stow and use rack - Rack Weight 64lbs - RV Rated and 5th Wheel (no travel trailers) with reduced weight ratings

Provides a clean and sleek look for your Saris Bones rack, these end caps allow excess strap length to be tucked neatly inside rack - Provides a clean and sleek look for your Saris Bones rack - Upgrade your current Bones or Bones EX rack (pre-2022) - Compatible with: Bones or Bones EX racks - Not compatible to use with any Bones Hitch racks or SUPERBones

Saris' Hatch Huggers fasten Saris racks (sold separately) to certain vehicles. They replace the regular straps for vehicles with glass hinge lines and vehicles with narrow gaps around the trunk.

Turn your hard to fit vehicle into a bike hauling machine, Hatch Huggers allow most Saris trunk mount carriers to be used on vehicles equipped with integrated spoilers or glass hatchbacks - Designed for cars that require a custom fit, including those with glass-hinge lines or surfaces that are difficult for traditional trunk rack hooks to secure to, such as plastic or squared off edges. - Hatch Huggers SL attach to your trunk rack using the existing j-hooks and straps - Quick and easy to install and attach to your Saris Trunk Rack. - Includes two bumpers that are compatible with existing rack straps and hooks for Saris trunk-mount bike racks. - Maximum capacity-two bikes, 35 lb. each, 70 lbs. total.

The arch is arguably the most important engineering feat in human history. One look at Saris’ Bones 2-Bike rack would make any ancient Roman proud. With three incredibly strong, arched leg mounts and two arched arms, you can rest assured that your bike is in solid hands. Six highly adjustable straps, each equipped with soft coated hooks, hold the rack down, while the three legs have grippy rubber feet to provide a sturdy base. Ratcheting anti-sway straps ensure a tight grasp on your bikes. The Bones is made out of 100% recyclable, non-rusting parts and fits almost all vehicles—even those with spoilers.

Saris’ Bones 3-Bike rack unites utilitarian strength and modern style. Crafted of incredibly strong, injection-molded plastic, the four arched leg mounts and two arched arms cradle your bikes on different levels to minimize unwanted handlebar and seat contact. Six highly adjustable straps, each equipped with soft, vinyl-coated hooks, hold the rack down, while the four legs have grippy rubber feet to provide a sturdy base that won't harm your vehicle's finish. Ratcheting, soft-touch, anti-sway straps ensure a tight grasp on your bikes. The Bones is made out of 100% recyclable, non-rusting parts and fits almost all vehicles—even those with spoilers. Plus, it folds fast for easy portability and storage.

A Leg Above the Rest The Bones trunk rack made a name for itself in the mid-90's, and 25 years later it's doing it again. How? By expanding its vehicle compatibility to fit 20% more of the most popular vehicles, including those with spoilers. Featuring a unique arched leg, the Bones EX gracefully avoids contact with most plastic spoilers found on many of the best-selling sedans, hatch backs and SUVs. This simple, yet game-changing design by Fabio Pedrini transformed the iconic trunk rack into one that could fit 90% of the top 50 vehicles sold in the USA. Equipped with premium bike hold downs and a streamlined strap management system, the Bones EX is penning its own chapter in history books. And just like its legendary predecessor, the Bones EX is made in Madison, Wisconsin, USA, with locally sourced materials that'll last a lifetime. Features - Carries 2 bikes (35lb/bike). - Has the largest vehicle compatibility of any trunk rack on the market. - Unique dog leg fits over most spoilers, including those on popular sedans, hatchbacks and SUVs. - Premium bike hold downs that are easy to use and quick to load. - Integrated strap management system provides clean look and eliminates flapping straps. - Best-in-class ratchet straps speedily fasten bike to the rack. - Strongest frame on the market. - Built with 100% recyclable materials. - Rust-free injection molded plastic. - Articulated rubber feet to protect paint. - Arc–based design separates bikes on different levels. - Patents issued and pending. - Lightweight at 11 lbs.